Panel Template

[myrv9.com]

I will be buying the servos, EMS BU & EFIS AP III over the next few months (trying to spread out the financial hit). However, I am ready to cut the panel now. Can I buy a bezel and empty rear housing to start work on the panel now?

I could return / exchange them when I buy the actual units...

Here is a peak at my panel layout...

http://myrv9.com/RV9A_Photos/PhotoPost_files/Media/N35PM_Panel/N35PM_Panel.jpg

LRI - Lift Reserve Indicator
EFIS AP III
Garmin 696
PMA9000EX
Garmin SL-30
iComm A210
Garmin GTX 330
EMS BU

[TrutrakTech]

Hi Peter,

Unfortunately we don't have any spare bezels to use for this purpose. The casing on the back actually attaches to the internal hardware, so you wouldn't be able to attach it to the bezel. There are cutout templates of each bezel type in the EFIS installation manaul. You can get that from our website. Thanks!

[myrv9.com]

Ok, its been a few months... and the plan and the plane are coming along. Take a look at the real panel. Of course this is just my first test fitting of the completed panel. No power or wires have been run yet, so the EFIS screens are just paper cut outs taped over the actual units.

http://www.myrv9.com/Main/FK/Pages/FinishKit_04_files/Media/IMG_5609/IMG_5609.jpg

http://www.myrv9.com/Main/FK/Pages/FinishKit_04_files/Media/IMG_5618/IMG_5618.jpg

What do you think. Does it look like my paper template in the first post of this thread?

[TrutrakTech]

Very nice! You definitely pretty much stuck to your original plan. Congrats on getting to that stage!

[SMO]

Of course your equipment list is very similar to mine, so whats not to like!!!